home *** CD-ROM | disk | FTP | other *** search
- Path: nntp-trd.UNINETT.no!lolsen
- From: lolsen@hsr.no (Lasse Olsen)
- Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.misc
- Subject: Re: new A4000T and 040 accelerator problem
- Followup-To: comp.sys.amiga.hardware,comp.sys.amiga.misc
- Date: 10 Jan 1996 11:13:16 GMT
- Organization: UNINETT news service
- Message-ID: <4d070c$5at@dole.uninett.no>
- References: <4cvt0d$gfm@fountain.mindlink.net>
- NNTP-Posting-Host: gorina7.hsr.no
- X-Newsreader: TIN [version 1.2 PL2]
-
- Mike Nann (mike_nann@mindlink.bc.ca) wrote:
-
- : I've encountered a problem with the new Amiga 4000T and a GVP A4000
- : T-Rex rev. 4 accelerator that used to be in an old Amiga 4000 -- with
- : the accelerator replacing the stock CPU daughtercard, the computer
- : won't boot.
-
- : I take it that the CPU daughtercards from the old 4000's aren't
- : compatible with those from the new machines?
-
- They should be - the local-bus layout is exactly the same
- as before to my knowledge.
- What about the INT/EXT motherboard jumper? Did you change
- this in your previous A4000?
-
- : Anyone have any
- : suggestions on how to make this go?
-
- It could be a loose connection - are you sure you have
- the card tightly installed?
- Cheers...
-